BannerA.gif (17389 bytes)

Elastack Tough Grade Molding Compound
Technical Specification

Maximum pouring temperature 175 degrees C
347 degrees F
Approximate Viscosity at 175 degrees C 2000 centipoise
High temperature limit above which immediate scorching or browning may result 175 degrees C
347 degrees F
Flammability Burns in contact with source of open
flame.  Can sustain flame under some
conditions with heavy initiation.
Vapor emission at pour temperature Emits process smoke
above approx. 160 degrees C
Elongation to break (72 degrees F) Greater than 700 %
Hardness Shore A 00
Density 0.9 grams/cc
Optical clarity slight blue/white haze
Index of refraction 1.55
Weatherability Withstands direct outdoor exposure
to sunlight for 1 month with almost
no observable physical change

For more information about these products, and other interesting
materials...Visit the experts at
elastack.com
      

Creditcards.jpg (3095 bytes)

Return to Home.jpg (4392 bytes)

Hit Counter

Contact Information:

Postal address (Your credit card charge will appear on your statement from):
Designs for Success, Inc.
          2178-A Savannah Hwy, Suite F
Charleston, SC 29414

Telephone:
       
843-763-7557
FAX:
        843-763-7557

Electronic mail:
General Information & Support: DFSIncSC@aol.com
Webmaster: VicDFS@aol.com
Promise:
Our policy is to provide the best products and services
we can to our customers.  We promise you complete
satisfaction.  If you are not completely satisfied, please
contact us at one of the above e-mail or mail sites. 

Copyright 1997/1998/1999/2000/2001/2002/2003/2004/2005/2006/2007/2008 Designs For Success, Inc.

Hit Counter